Xilinx 4.2 tutorials with the Digilent D2E and DIO2 boards

Information on parts in the Xilinx library for use with the schematic editor can be found at:
http://toolbox.xilinx.com/docsan/xilinx4/manuals.htm

This chart shows the connections between the D2E and the DIO2.

These manuals way also help:
D2E Manual
DIO2 Manual

For each lab, you will be required to demo all of the assignments to the TA. You will also have to write a short report (1 or 2 pages) that explains what you did for the assignments (what you learned, what innovative tricks you might have discovered, etc.)

You are allowed to work in groups of 1 or 2, but all reports must be turned in seperately (demos can be in teams).

Chapter 1 – A simple design using the D2E board

Chapter 2 – Using the DIO2 board part 1

Chapter 3 – The Core Generator

Chapter 4 – Using the DIO2 board part 2 (LCD module)

Chapter 5 – The State Editor

Chapter 6 – Making a Calculator